Can line robot

The challenge

Bytronic was approached by a leading beverage manufacturer to automate a manual inspection in its can packing lines. The primary objective was to efficiently layer 12 packs of cans into 4×6 and 4×4 layers to be palletised.

The project faced specific challenges, including occasional twisted packs and packs being missed, resulting in incorrectly laid pallets. In this event it takes 15-20 minutes for an operator to clear out the line and remove the incorrect layer from the pallet.

To address these problems, the customer first attempted a remote inspection system, through a CCTV camera and an operator watching from a distance. However, operators would occasionally miss an error, so the customer approached Bytronic to install an innovative vision system.

The solution

During development, Bytronic made several design and technical decisions to ensure the success of the project. To capture a comprehensive view of the packs, the camera was mounted 3.5 metres above the packing line.

Strobing lighting is unpleasant for operators and also causes a risk of epilepsy, therefore flood lighting was used. A liquid lens was selected to facilitate easy focusing and provide flexibility for future applications. Integration of the vision system was achieved through EtherNET/IP communication to the line PLC.

The Cognex In-Sight 2800 camera was chosen due to its 1.6MP sensor, liquid lens, and, most importantly, the easy to use “Classify” tool driven by edge learning. Edge learning is a form of artificial intelligence where the processing takes place on-device where the data originates. Due to this, the In-Sight 2800 offers a cost effective solution that is easy and quick to set up.

Results

The vision system was a clear success. Bytronic automated the initial SKUs, and with Bytronic’s training the customer can now extend it to a further 30–40.

On the can packing line, deep learning and greater reliability have significantly improved productivity. Running 24/7, the system also flags repeat faults for root cause analysis, supporting continuous improvement and preventative measures.

Bytronic’s engineers see wide potential for the In-Sight 2800 to automate other repetitive tasks across industries.

Aerial shot of cans packed up

Trusted in production by

bmw logo
De La Rue logo
GKN Aerospace logo
kelloggs logo
cranswick logo
dematic logo
Pilkington logo
Unilever logo
Lear logo
p and g logo
Thyssenkrupp logo
abinbev logo
Innovation that works in the real world

Deployed in demanding production environments worldwide

25+ years

Delivering industrial vision and inspection systems

1,000+

Installations

15+ countries

A UK company serving a global customer base

Recognised by industry

BSI ISO logo
bfbi logo web
Ukiva
Automate UK