Cook Temperature checks on every product | tempcomply

Cook-temperature checks on every product, in line

TempComply checks the surface cooking temperature of every product, in-line and in real time. It combines thermal imaging with 3D profiling and intelligent masking to isolate each item from the belt and process, then checks every product against its agreed limit. Evidence for every product, not just the ones you probe.

Checks

Surface temperature of every product against its agreed limit

Formats

Cooked food products, set up per product

Speed
Every product at line speed
Deploys

In line at the cook exit, linked to your line controls

Thermal image of a pizza
The problem

A batch probe tells you about one product, not the batch

Cooking is a critical control point. Probing a sample of products tells you those products were cooked; it says nothing about the one at the cold edge of the belt or the one that came through during an oven dip. Under-cooking is a food-safety failure; over-cooking to be safe costs yield, energy and quality.

TempComply checks every product as it leaves the cooking process and records the result, so the probe checks your HACCP plan requires are backed by evidence for every product, not just a sample.

What it checks

What TempComply checks

Every product, every time, against the temperature limit you set.

Cooking compliance

Surface temperature on every product

Every product’s surface temperature compared with the agreed limit, not an average.

Cooking compliance

Under-cooked products

Products below the limit flagged and rejected before packing.

Isolation

Product separated from the process

3D profiling and masking isolate each item from the belt, trays and hot equipment.

Process

Temperature across the belt

Results by lane and position show where the process runs cold.

Evidence

A record for every product

Results recorded as evidence for the cooking critical control point.

how it works

How TempComply reaches a result

Every Bytronic system follows the same five stages. This is what each one means for TempComply.

The five stages: Sense, Understand, Decide, Act, Prove
Bytronic five steps mobile

Sense

Thermal imaging with 3D profiling captures every product as it leaves the cooking process.

Understand

Intelligent masking isolates each item and measures its surface temperature against the agreed limit.

Decide

Surface temperature is compared with the agreed limit for the running product.

Act

Under-temperature products are rejected; the operator sees which product and where.

Prove

Temperature by lane, position and time show cold spots in the process and if a fix worked.

Can you rely on the result?

Every inline inspection carries two conflicting operational risks: stopping good product (false rejects) or passing a critical defect (escapes). A vision platform is only viable if your technical team knows its measured error rate and the validation limits applied to each check. Three things keep both risks under control:

The right method for each check

Surface temperature is measured, with 3D profiling and masking isolating each product from the belt and hot equipment. Each reading is compared with its agreed limit.

Proven on your line

Configured to your line and tested in a  live trial, not a demonstration. You see performance agaisnt an agreed baseline, including false rejects and under-temperature products missed.

Locked in production

Limits for each product do not change on the line without approval. Any change is controlled, re-tested and recorded.

The system you validated is the system that runs.

The complete solution

One system: hardware, software, integration and data

TempComply is delivered as a complete system, designed for your line, installed and commissioned by Bytronic engineers, and supported through its working life.

1

Hardware

Thermal camera with 3D profiling, mounting and washdown housing, control panel, industrial PC and HMI.

2

AI software

Bytronic software for product isolation (masking), surface-temperature measurement, including coldest-point detection and agreed limit checks, configured per product.

3

Integration

Installation, line integration and commissioning; reject logic through your PLC.

4

Data and evidence

A temperature record for every product, supporting HACCP and customer audits.

Where it's used

Cook-temperature checks in food production

For cooked products where every item must reach temperature.

Cooked meats and proteins
Ready-meal components
Bakery
Other cooked products
Application example

Food and beverage

Cooked products checked for surface cooking temperature before chilling and packing.

Specification

Specification and deployment

Each system is designed for the customer’s line. Typical parameters:

MeasurementSurface temperature of every product against agreed limit; coldest point located per item
ImagingThermal with 3D profiling
Product isolationIntelligent masking separates each product from the process
Line speedFull line speed, subject to application
Product typesCooked food products, set up per product
Temperature range and accuracy
Hardware specific to the application. Typically -20°C to +1500°C with a baseline accuracy of ±2°C . 
IntegrationPLC; reject logic
DataTemperature record per product
Where vision inspection fits, and where it doesn't

A candid view before you invest

Best suited to

  • Cooked products that must each reach a defined temperature
  • Continuous ovens and fryers where temperature varies across the belt
  • Lines that need 100% evidence for the cooking control point

Another solution may fit better for

  • Core temperature validation, which still needs probes under your HACCP plan
  • Seal faults on the finished pack: SealCheck DL
  • Thermal checks outside food, such as fire risk or adhesive beads: TempCheck
  • Glue on cartons and cases: HotSpot

Not sure which applies? Talk to an engineer and we’ll map your line. Something not covered here? Bring us the problem.

Innovation that works in the real world

Cooking verification in practice

Application example

100% cooking verification on a continuous line

Batch probing could not show that every product reached temperature. Thermal imaging with 3D profiling found the coldest point on each product. Every product verified and recorded before packing.

Works with

TempComply works with

We choose on fit, not brand: our own technology where it gives the best outcome, partner technology where it is better, and combinations where one technology is not enough.

SealCheck DL

Seals checked straight after sealing.

PackCheck DL

Contents verified before the seal.

Frequently asked questions

No. TempComply measures surface temperature, without contact, on every product. Core-temperature validation still needs probes under your HACCP plan; TempComply adds evidence for every product alongside them.

Thermal vision uses cameras that detect infrared radiation to measure surface temperature across a whole scene, without contact.

Every object emits infrared energy in proportion to its temperature. A thermal camera measures that energy for each pixel and converts it into a temperature map. Commissioning sets up the camera for each product’s surface so the readings are accurate.

It checks every product at the cooking critical control point and records the result, giving evidence for every product alongside your probe checks.

Yes. 3D profiling and intelligent masking isolate each product from the belt and equipment before its temperature is assessed.

How we work

Prove it on your line before you commit capital

No off-the-shelf system fits a real production line perfectly, so we prove performance first, with a fully managed trial on your line.

1

Scope the problem

We map the exact failure, its cost and where it happens on your line.

2

Run a live trial

We design, install and run the inspection on a designated line, configured to your products.

3

Show the business case

You get real performance data against an agreed baseline and projected payback.

4

Install and support

We integrate, commission, train your team and support the system through its working life.

Recognised by industry

BSI ISO logo
bfbi logo web
Ukiva
Automate UK

Check every product at the cook exit

Bring us your cooking line. We’ll demonstrate TempComply checking your own product.